Searchresult

Searched for: Building automation - Found(54)

Product

eStat20 – electronic hygrostat with remote sensor

...suitable for many applications: HVAC and building automation, cooling and climate technology, storage and transport, apparatus and plant engineering, production and process automation, agricultural and...

Product

eStat10 DUO – electronic hygro-thermostat

...for many applications: HVAC and building automation, cooling and climate technology, storage and transport, apparatus and plant engineering, production and process automation, agricultural and food...

Product

eStat20 DUO – electronic hygro-thermostat with remote sensor

...for many applications: HVAC and building automation, cooling and climate technology, storage and transport, apparatus and plant engineering, production and process automation, agricultural and food...

Product

LI – indoor

...to monitor energy costs in HVAC and building automation applications. Thanks to their high quality manufacturing, these transmitters can also be used in moderate industrial...

Product

LW – wall mounted

...monitor energy costs in HVAC and building automation applications. Moderate industrial conditions Thanks to its high quality manufacturing, the LW transmitter can also be used...

Product

LK – duct mounted

...monitor energy costs in HVAC and building automation applications. Moderate industrial conditions Thanks to its high quality manufacturing, the LW transmitter can also be used...

Product

LP – probe

...are very suitable for helping to monitor energy costs in HVAC and building automation applications. Thanks to their high quality manufacturing, these transmitters can also...

Product

eStat10 – electronic hygrostat

...and temperature) are suitable for many applications: HVAC and building automation, cooling and climate technology, storage and transport, apparatus and plant engineering, production and process...

Product

(T)FG80 – Humidity Temperature Sensor

Typs: FG80   – Humidity Sensor TFG80 – Humidity Temperature Sensor (T)FG80H with passive resistance output up to 10 kOhm (T)FG80J with active current or voltage output ...

Product

HSF Humidity sensor

Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces to monitor if the temperature drops below the dew-point. They measure the relative humidity  to –  influence co...

Product

HG80 Duct humidistat

On-off controller The humidistat type HG80 is used as an on-off controller to control the relative air humidity. It is used to control air humidifying and dehumidifying in offices and computer rooms...

Product

PL – probe

Humidity and temperature sensors – PL have been specially adapted to the needs of the ventilation and air-conditioning sector. The PL series are equipped with gauze filters as standard. Other...

Product

DW – wall mounted

Excellent transmitter – highly accurate and easy to install. The industrial versions DW can be used at operating temperatures between -30 to 80 °C. Equipped with the highly dynamic capacitive...

Product

DI – Indoor

Sensors for humidity and temperature – the integral measuring chamber is separated from the transmitter electronics, this ensures effective ventilation of the humidity and temperature sensing ...

Product

KL – duct mounted

The sensors of the „Lightserie“ have been specially adapted to the needs of the ventilation and air-conditioning sector. The KL and PL series are equipped with gauze filters as standard. Other f...

Product

Indoor humidistat Hygroswitch

On-off controller The room humidistat Hygroswitch is an on-off controller. It is used to control air humidifying and dehumidifying in offices and computer rooms.  Other areas of use are storage of ...

Product

DUO1060

The hygro-thermostat type DUO 1060 is used as an on-off controller to control the relative air humidity and the temperature. Typical areas of use are climatic cabinets and the control of air humidif...

Product

WL – indoor

Humidity and temperature sensors indoor of the “Light series” have been specially adapted to the needs of the ventilation and air-conditioning sector. Capacitive MELA® sensorchips Equip...

Product

DK – duct mounted

Humidity Sensor DKF Humidity Temperature Sensor DKK Excellent transmitter – highly accurate and easy to install. The industrial versions DK (duct mounted version) can be used at operating temp...

Product

(T)FM80 OEM – duct version

Humidity temperature sensor – duct version typs: FM80 – Humidity module TFM80 – Humidity-Temperature-Module TFM80 Module for integration in a wide range of customer-specific standard produ...

Product

Indoor humidistat HG120

Selfpowered humidistats robust and reliable with On-off controller The humidistat type HG120 is used as an on-off controller to control the relative air humidity. It is used to control air humidifyi...

Product

Indoor humidistat HGMini

Indoor Humidistat ON/OFF controller The HG Mini serves as an on-off controller for regulating relative air humidity. It’s suitable for controlling air humidifiers and dehumidifiers in various ...

Product

HM120 Hygro Modul

The hygro module HM120 is a humidity-dependent switch that can be fitted in equipment such as hygrostats, humidifiers, dehumidifiers, ventilating fans, driers and many more. The module represents an...

Product

Condensation controller FAS

Prevent damage By effectively managing condensate, a condensation controller helps prevent water damage, maintain system efficiency, and reduce the risk of indoor air quality issues caused by excess...

Product

Condensation controller FAS 250VAC

Prevent damage By effectively managing condensate, a condensation controller helps prevent water damage, maintain system efficiency, and reduce the risk of indoor air quality issues caused by excess...

Product

(T)FG120 – Indoor Humidity Temperature Sensor

Typs:
FG120   – Humidity Sensor
TFG120 – Humidity Temperature Sensor

Product

(T)FK80J – duct version

FK80J Humidity Sensors TFK80J Humidity-Temperature Sensors The sensors of the FK Series are very robust humidity and temperature sensors, providing highly accurate measurements across the entire mea...

Product

DZK – modular design

Easily customised modular design Excellent transmitter – high accuracy and easy to install. The probe and transmitter can be used in any combination. This makes them suitable for many installa...

Product

Condensation controller – FGO / FGS

Humidity sensor to prevent the building of condensed water...

Product

S series SVKA probes

Industry Transmitters for humidity and temperature, the A-series probe and transmitter are interchangeable and can be combined in any combination; they can be used at temperatures up to 85 °C in no...

Product

PC and PC.S probe

PC with cable connection PC.S with plug-in connection and coupling The robust construction and the option of equipping the sensors with special filters and a variety of special equipment, make these...

Product

ZC and ZC.H – Transmitter with remote probe

Heavy-duty transmitters for advanced requirements. The ZC and ZC.H (high temperature) transmitters are supplied with a robust, pressure die-cast aluminium housing and a stainless steel tube. They ca...

Product

GC-ME wall mounted – meteorology version

Heavy-duty transmitters for outdoor use our GC-ME series are supplied with a robust, pressure die-cast aluminium housing with aluminium sensor part. It is a very robust construction, especially deve...

Product

PC-ME and PC.S-ME outdoor version

Robust probes – outdoor meteorology applications: PC-ME with cable connection PC.S-ME with plug-in connection and coupling The robust construction and the option of equipping the sensors with ...

Product

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

Heavy-duty transmitters to measure humidity and temperature with advanced requirements. The ZC.D and ZC.DH (high temperature) transmitters are supplied with a robust, pressure die-cast aluminium hou...

Product

IVK – Stainless steel probes with plug-in connection (modbus)

Transmitters in the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a wide range of applications. Equipped with stai...

Product

ATEX KC.Ex – duct mounted

ATEX-certified high-precision Transmitter for use in potentially explosive atmospheres and areas with combustible dust; equipment in categories 1/2G and 2D. The sensors consist of a sensor part wit...

Product

BZ – Transmitter with remote probe

The BZ two-part-design can be used at temperatures between -80 °C and +200 °C and at pressures of up to 10 bar. In the B series, the probe and transmitter are firmly connected to one another. The ...

Product

ITK – Stainless steel probes (modbus)

Stainless steel probes with digital output and robust head of the I series are compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a wide ran...

Product

AW – combined with probes of the S series

Industry Transmitters for humidity and temperature, AW (wall mounted), can be combined with any probe of the S series. The AW-transmitter combined with the probe SVKA.00 (pictured here) can measure ...

Product

BK – duct mounted

Depending on the individual design, these sensors can be used at temperatures between -80 °C and +200 °C and at pressures of up to 10 bar. In the B series, the probe and transmitter are firmly con...

Product

BW – wall mounted

Our Heavy-duty transmitter wall mounted BW can be used at temperatures between -40 °C and 85 °C. The integrated hx processor can calculate further humidity values and apply them to the two outputs...

Product

AK combined with probes of the S series

The transmitter AK, (duct mounted), can be combined with any probe of the S series. The AK-transmitter combined with the probe SVKA.00 or SVKA.0E (pictured here) can measure relative humidity and te...

Product

AW with remote probe

The transmitter AW, (wall mounted), can be combined with any probe of the S series. The AW-transmitter combined with the probe SZKA.0H (pictured here) can measure relative humidity and temperature i...

Product

(T)FK120J – Indoor

FK120J Humidity Sensor TFK120J Humidity-Temperature Sensor Transmitters for semi-industrial and industrial applications. These humidity and temperature sensors are very robust, providing highly accu...

Product

IAK – Probes with plug-in connection

I series Analogue probes with plugin of the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a wide range of applicat...

Product

IRK – Probes with robust head

Analogue probes with robust head – I series Transmitters of the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used fo...

Product

VC – Compact rod sensor

Compact rod sensor VC . They can be used in a wide range of applications and have been specially developed for extreme conditions. Their design also makes them ideal for equilibrium moisture measure...

Product

VR, VR.D – Compact sensor with robust head

Compact sensors with robust head in the stainless steel casing can be employed up to 25 bar or up to 10 bar with ball valve. All sensors in this series are equipped as standard with equipped with a ...

Product

VC/11 Compact sensor (ammonia-resistant)

These compact sensors have been specially developed for extreme conditions. The sensor can be used in areas contaminated with a variety of pollutants (e.g. ammonia), without damaging the element or ...

Product

ATEX GC.Ex – wall mounted

ATEX-certified high-precision transmitter, tailor-made explosion-proof technology with ATEX certification for use in potentially explosive atmospheres and areas with combustible dust; equipment in c...

Product

GC – wall mounted

Heavy-duty transmitters analogue output for advanced requirements. The transmitters in this series are supplied with a robust, pressure die-cast aluminium housing with aluminium sensor part, to meas...

Product

S series SZKA probes with cable

The probes of the s series are exchangeable and can be used in any combination with the transmitterheads AK or AW. Depending on the individual design, these sensors can be used at temperatures betwe...

Product

KC – duct mounted

Heavy-duty transmitters to measure humidity and temperature with advanced requirements. The KC transmitters are supplied with a robust, pressure die-cast aluminium housing and a stainless steel tube...