Searchresult

Searched for: Ceramic drying - Found(36)

Product

ZC and ZC.H – Transmitter with remote probe

...suited to industrial applications, e.g. drying processes. ZC operating temp. up to 125 °C ZC.H operating temp. up to 200 °C Capacitive MELA® sensorchips Equipped...

Product

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

...125°C or up to 160°C. These sensors are ideally suited for industrial applications, e.g. in drying processes. Capacitive MELA® sensorchips Equipped with the highly dynamic...

Product

GC – wall mounted

...to measure relative humidity and temperature, in air and other non-aggressive gases. These sensors are ideally suited to industrial applications, e.g. drying processes. Capacitive MELA®...

Product

KC – duct mounted

...ideally suited to industrial applications, e.g. drying processes. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA® sensor element, the sensor provides reliable performance...

Product

HM120 Hygro Modul

The hygro module HM120 is a humidity-dependent switch that can be fitted in equipment such as hygrostats, humidifiers, dehumidifiers, ventilating fans, driers and many more. The module represents an...

Product

DUO1060

The hygro-thermostat type DUO 1060 is used as an on-off controller to control the relative air humidity and the temperature. Typical areas of use are climatic cabinets and the control of air humidif...

Product

BK – duct mounted

Depending on the individual design, these sensors can be used at temperatures between -80 °C and +200 °C and at pressures of up to 10 bar. In the B series, the probe and transmitter are firmly con...

Product

BW – wall mounted

Our Heavy-duty transmitter wall mounted BW can be used at temperatures between -40 °C and 85 °C. The integrated hx processor can calculate further humidity values and apply them to the two outputs...

Product

(T)FG80 – Humidity Temperature Sensor

Typs: FG80   – Humidity Sensor TFG80 – Humidity Temperature Sensor (T)FG80H with passive resistance output up to 10 kOhm (T)FG80J with active current or voltage output ...

Product

(T)FG120 – Indoor Humidity Temperature Sensor

Typs:
FG120   – Humidity Sensor
TFG120 – Humidity Temperature Sensor

Product

DZK – modular design

Easily customised modular design Excellent transmitter – high accuracy and easy to install. The probe and transmitter can be used in any combination. This makes them suitable for many installa...

Product

HG80 Duct humidistat

On-off controller The humidistat type HG80 is used as an on-off controller to control the relative air humidity. It is used to control air humidifying and dehumidifying in offices and computer rooms...

Product

S series SVKA probes

Industry Transmitters for humidity and temperature, the A-series probe and transmitter are interchangeable and can be combined in any combination; they can be used at temperatures up to 85 °C in no...

Product

PC and PC.S probe

PC with cable connection PC.S with plug-in connection and coupling The robust construction and the option of equipping the sensors with special filters and a variety of special equipment, make these...

Product

GC-ME wall mounted – meteorology version

Heavy-duty transmitters for outdoor use our GC-ME series are supplied with a robust, pressure die-cast aluminium housing with aluminium sensor part. It is a very robust construction, especially deve...

Product

PC-ME and PC.S-ME outdoor version

Robust probes – outdoor meteorology applications: PC-ME with cable connection PC.S-ME with plug-in connection and coupling The robust construction and the option of equipping the sensors with ...

Product

DW – wall mounted

Excellent transmitter – highly accurate and easy to install. The industrial versions DW can be used at operating temperatures between -30 to 80 °C. Equipped with the highly dynamic capacitive...

Product

DI – Indoor

Sensors for humidity and temperature – the integral measuring chamber is separated from the transmitter electronics, this ensures effective ventilation of the humidity and temperature sensing ...

Product

IVK – Stainless steel probes with plug-in connection (modbus)

Transmitters in the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a wide range of applications. Equipped with stai...

Product

ATEX KC.Ex – duct mounted

ATEX-certified high-precision Transmitter for use in potentially explosive atmospheres and areas with combustible dust; equipment in categories 1/2G and 2D. The sensors consist of a sensor part wit...

Product

BZ – Transmitter with remote probe

The BZ two-part-design can be used at temperatures between -80 °C and +200 °C and at pressures of up to 10 bar. In the B series, the probe and transmitter are firmly connected to one another. The ...

Product

ITK – Stainless steel probes (modbus)

Stainless steel probes with digital output and robust head of the I series are compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a wide ran...

Product

AW – combined with probes of the S series

Industry Transmitters for humidity and temperature, AW (wall mounted), can be combined with any probe of the S series. The AW-transmitter combined with the probe SVKA.00 (pictured here) can measure ...

Product

AK combined with probes of the S series

The transmitter AK, (duct mounted), can be combined with any probe of the S series. The AK-transmitter combined with the probe SVKA.00 or SVKA.0E (pictured here) can measure relative humidity and te...

Product

AW with remote probe

The transmitter AW, (wall mounted), can be combined with any probe of the S series. The AW-transmitter combined with the probe SZKA.0H (pictured here) can measure relative humidity and temperature i...

Product

eStat20 – electronic hygrostat with remote sensor

Combined device – sensor and hygrostat in one Hygrostat with two individually configurable relays (humidity) and two additional analogue outputs (for humidity and temperature) are suitable for man...

Product

DK – duct mounted

Humidity Sensor DKF Humidity Temperature Sensor DKK Excellent transmitter – highly accurate and easy to install. The industrial versions DK (duct mounted version) can be used at operating temp...

Product

eStat10 DUO – electronic hygro-thermostat

Combined device – sensor and hygrostat in one Hygro-Thermostat with two individually configurable relays and two additional analogue outputs (for humidity and temperature) are suitable for many ap...

Product

eStat20 DUO – electronic hygro-thermostat with remote sensor

Combined device – sensor and hygrostat in one Hygro-Thermostat with two individually configurable relays and two additional analogue outputs (for humidity and temperature) are suitable for many ap...

Product

IAK – Probes with plug-in connection

I series Analogue probes with plugin of the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a wide range of applicat...

Product

IRK – Probes with robust head

Analogue probes with robust head – I series Transmitters of the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used fo...

Product

VC – Compact rod sensor

Compact rod sensor VC . They can be used in a wide range of applications and have been specially developed for extreme conditions. Their design also makes them ideal for equilibrium moisture measure...

Product

VR, VR.D – Compact sensor with robust head

Compact sensors with robust head in the stainless steel casing can be employed up to 25 bar or up to 10 bar with ball valve. All sensors in this series are equipped as standard with equipped with a ...

Product

VC/11 Compact sensor (ammonia-resistant)

These compact sensors have been specially developed for extreme conditions. The sensor can be used in areas contaminated with a variety of pollutants (e.g. ammonia), without damaging the element or ...

Product

Indoor humidistat HG120

Selfpowered humidistats robust and reliable with On-off controller The humidistat type HG120 is used as an on-off controller to control the relative air humidity. It is used to control air humidifyi...

Product

S series SZKA probes with cable

The probes of the s series are exchangeable and can be used in any combination with the transmitterheads AK or AW. Depending on the individual design, these sensors can be used at temperatures betwe...