Searchresult

Searched for: Housing, stainless steel - Found(47)

Product

ITK – Stainless steel probes (modbus)

...80 °C Accuracy H.: ± 1,5 % RH / 10...90 % RH Accuracy T.: ± 0,2 K Robust Very precise Dew-resistant Stainless steel IP 65...

Product

IVK – Stainless steel probes with plug-in connection (modbus)

...80 °C Accuracy H.: ± 1,5 % RH / 10...90 % RH Accuracy T.: ± 0,2 K Robust Very precise Dew-resistant Stainless steel IP 65...

Product

Protective filter Ø 15 mm

...recommend our stainless steel sinter filter. ZE04- Filter made of high-grade steel 1.4301, side openings, front open. Protection against mechanical impacts. Suitable for low air...

Product

VR, VR.D – Compact sensor with robust head

Compact sensor with stainless steel casing, resistant to pressure up to 25 bar...

Product

ZC and ZC.H – Transmitter with remote probe

Heavy-duty transmitters for advanced requirements. The ZC and ZC.H (high temperature) transmitters are supplied with a robust, pressure die-cast aluminium housing and a stainless steel...

Product

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

...housing and a stainless steel tube. The pressure-resistant version „D“ and „HD“ can be used at pressures up to 25 bar, at temperatures up to...

Product

ATEX KC.Ex – duct mounted

...sensor part with a sintered filter (both made from stainless steel), mounted on a robust aluminium pressure die-cast housing (transmitter component). These sensors measure with...

Product

ATEX GC.Ex – wall mounted

...2D. The sensors consist of a sensor part with a sintered filter (both made from stainless steel), mounted on a robust aluminium pressure die-cast housing...

Product

KC – duct mounted

...Accuracy T. ± 0,2 K with voltage output Accuracy T ± 0,3 K with current output Current outputs galvanically isolated Stainless steel sensor tube IP65...

Product

GC-ME wall mounted – meteorology version

...K with voltage output Accuracy T. ± 0,3 K with current output Current outputs galvanically isolated With robust aluminium die-cast housing for outdoor use IP65...

Product

Installation aids Ø 15 mm

ZA24 Mounting plate, stainless steel and brass, nickel-plated, suitable for mounting sensors Ø 15 mm in ventilation ducts up to 200 °C ZA25 Mounting plate,...

Product

Protective filter Ø 20 mm for outdoor applications

For extreme applications (near the sea, desert, mountains, areas with high air speed etc.) we recommend our stainless steel sinter filter....

Product

S series SVKA probes

Operating temp. up to 85 °C Accuracy: ±1,5 % RH On-site calibration IP65 Stainless steel sensor tube Modular, can be combined...

Product

VC – Compact rod sensor

Compact stainless steel rod sensor for use under extreme conditions...

Product

VC/11 Compact sensor (ammonia-resistant)

Humidity and temperature sensor with stainless steel tube, resistant to ammonia...

Product

S series SZKA probes with cable

Operating temp. up to 200 °C Accuracy : ±1,5 % RH On-site calibration IP65 Stainless steel sensor tube Modulair, can be combined...

Product

PC and PC.S probe

...areas with high air speeds, etc.) we recommend one of our stainless steel sintered filters. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA®...

Product

PC-ME and PC.S-ME outdoor version

...(near the sea, in deserts, mountains, areas with high air speeds, etc.) we recommend one of our stainless steel sintered filters. Capacitive MELA® sensorchips Equipped...

Product

BZ – Transmitter with remote probe

...±1,5 % RH Accuracy T.: ± 0.15 K with analogue output Accuracy T.: ± 0.2 K with modbus On-site calibration IP65 Stainless steel sensor tube...

Product

AW – combined with probes of the S series

Operating temp. up to bis 85 °C Accuracy : ±1,5 % RH On-site calibration IP65 Stainless steel sensor tube Modulair, can be combined...

Product

BK – duct mounted

...RH Accuracy T.: ± 0.15 K with analogue output Accuracy T.: ± 0.2 K with modbus On-site calibration hx converter Stainless steel sensor tube IP65...

Product

Installation aids Ø 20 mm

...to 80 °C ZA24/28 Mounting plate, suitable for mounting sensors Ø 20 mm in ventilation ducts up to 200 °C (stainless steel and brass, nickel-plated)...

Product

AK combined with probes of the S series

Operating temp. up to 150 °C Accuracy : ±1,5 % RH On-site calibration IP65 Stainless steel sensor tube Modulair, can be combined...

Product

AW with remote probe

Operating temp. up to 200 °C Accuracy : ±1,5 % RH On-site calibration IP65 Stainless steel sensor tube Modulair, can be combined...

Product

Pressure-tight fitting

ZA28 Pressure-tight feed-through fitting, pressure-tight up to 10 bar, for temperatures up to 150 °C. Thread G 3/4" with locking ring, Material: Stainless steel 1.4571...

Product

IAK – Probes with plug-in connection

...can be used for a wide range of applications. Equipped with stainless steel sintered filters, they can be used in extreme locations near the sea,...

Product

RC – Probe with robust head and RC-ME meteorology

...sea, in deserts, mountains, areas with high air speeds, etc.) we recommend one of our stainless steel sintered filter. Capacitive MELA® sensorchips Equipped with the...

Product

IRK – Probes with robust head

...high precision. They can be used for a wide range of applications. Equipped with stainless steel sintered filters, they can be used in extreme locations...

Product

Protective filter Ø 20 mm

...ZE16, but with inserted filter gauze made of high-grade steel, mesh size approx. 0.11 mm. Protection against mechanical impacts and coarse dirt. Suitable for low...

Product

Condensation controller FAS

...condensation. Remarkably straightforward and durable design Protected by the housing, relative humidity near to dew point can form inside. The aluminum plate is adjacent to...

Product

Pluggable probe

...lengths of 2 m, 5 m, 10 m or 25 m. The cable allows connection to both the housing and the probe. It has a...

Product

DW – wall mounted

...configured via USB port. Easy to install The housing provides protection in accordance with IP 65. Only a single screw is required to close it...

Product

Indoor humidistat Hygroswitch

...adjusting knob The Hygroswitch-i version has the external adjustment knob replaced with an adjustment wheel with a scale inside the housing. This makes unauthorized adjustments...

Product

Condensation controller FAS 250VAC

...condensation. Remarkably straightforward and durable design Protected by the housing, relative humidity near to dew point can form inside. The aluminum plate is adjacent to...

Product

eStat10 – electronic hygrostat

...normally open (NO) contacts. Both humidity set values and the desired hysteresis can be easily set without having to open the housing. It can be...

Product

eStat20 – electronic hygrostat with remote sensor

...be easily set without having to open the housing. It can be set with dip switch or rotating knob. Easy to install All the sensitive...

Product

DK – duct mounted

...via USB port. Easy to install The housing provides protection in accordance with IP 65. Only a single screw is required to close it securely....

Product

eStat10 DUO – electronic hygro-thermostat

...Both humidity set values and the desired hysteresis can be easily set without having to open the housing. It can be set with dip switch...

Product

eStat20 DUO – electronic hygro-thermostat with remote sensor

...easily set without having to open the housing. It can be set with dip switch or rotating knob. Easy to install All the sensitive electronics...

Product

DZK – modular design

...output variables can be freely configured via USB port. Easy to install The housing provides protection in accordance with IP 65. Only a single screw...

Product

HG80 Duct humidistat

...the housing. This makes unauthorized adjustments more difficult. More HG80-2 Two-point controller with two changeover contacts HG80vs - With a set value adjustment lock available...

Product

Indoor humidistat HG120

...and adjusting knob The HG120-i version was designed so that the control knob and scale are inside the housing. This makes unauthorized adjustments more difficult....

Product

Probe with cable

...… 125 °C. All cable probes are available in 3 different lengths (S, M, L). The cable can be plugged into the housing and can...

Product

Indoor humidistat HGMini

...adjusting knob The HG Mini-i version was designed so that the control knob and scale are inside the housing. This makes unauthorized adjustments more difficult....

Product

GC – wall mounted

Heavy-duty transmitters analogue output for advanced requirements. The transmitters in this series are supplied with a robust, pressure die-cast aluminium housing with aluminium sensor part,...

Product

(T)FG80 – Humidity Temperature Sensor

with the robust Polyga® humidity measuring element excellent measuring properties very high accuracy in high humidity outstanding durability washable measurement element IP64 high-grade steel sensor...

Product

(T)FM80 OEM – duct version

Accuracy: ±2.5 % RH very high accuracy in high humidity washable measurement element with the robust Polyga® humidity measuring element long-term stability high-grade steel sensor...