Searchresult

GC-ME wall mounted – meteorology version

...steel sinter filter. It measures relative humidity and temperature, in air and other non-aggressive gases in temperatures up to 80 °C. Capacitive MELA® sensorchips Equipped...

PC-ME and PC.S-ME outdoor version

Robust probes - outdoor meteorology applications: PC-ME with cable connection PC.S-ME with plug-in connection and coupling The robust construction and the option of equipping the...

RC – Probe with robust head and RC-ME meteorology

Very robust analogue probes optimized for meteorology: RC with robust head RC-ME meteorology version The robust construction and the option of equipping the sensors with...

IVK – Stainless steel probes with plug-in connection (modbus)

...high air speeds. Implementing the Modbus RTU protocol stack makes these sensors bus compatible. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA® sensor...

ITK – Stainless steel probes (modbus)

Stainless steel probes with digital output and robust head of the I series are compact probe sensors to measure relative humidity and temperature with high...

IAK – Probes with plug-in connection

...measurement accuracy for humidity achieves excellent values of ±1.5 % RH. In temperature measurement, the platinum resistance sensor achieves tolerances of ±0.15 K. Capacitive MELA®...

IRK – Probes with robust head

Analogue probes with robust head - I series Transmitters of the I series are robust, compact probe sensors to measure relative humidity and temperature with...

Protective filter Ø 15 mm

Filters and protective baskets are used to adapt sensors to the different locations where they are deployed. They protect the sensor from mechanical damage caused...

Protective filter Ø 20 mm

...use in extreme conditions, average pore size 20 μm. Meets the EMC directive for the I Series; but not for the other sensors. For e.g....

(T)FK80J – duct version

FK80J Humidity Sensors TFK80J Humidity-Temperature Sensors The sensors of the FK Series are very robust humidity and temperature sensors, providing highly accurate measurements across the...

Protective filter Ø 12 mm

...10 m/s. For e.g. meteorology, industry. ZE05 - Sintered filter made of fine-pored PTFE for extreme operating conditions, average pore size 20 μm. For e.g....

PC and PC.S probe

...variety of special equipment, make these sensors stand out as versatile all-rounders. Extreme outdoor conditions For extreme outdoor conditions (near the sea, in deserts, mountains,...

MCK – miniature sensor

Miniature humidity and temperature sensors are specially adapted to measurement tasks for which there is only limited space available. They deliver accurate values of the...

Installation aids Ø 20 mm

ZA20 Mounting plate, suitable for mounting sensors Ø 20 mm in ventilation ducts up to 80 °C ZA24/28 Mounting plate, suitable for mounting sensors Ø...

Installation aids Ø 15 mm

VR, VR.D – Compact sensor with robust head

...pressure-resistant up to 25 bar They have been specially developed for harsh operating conditions. Sensors are used to measure the relative humidity or the relative...

Weather guard

Weather guard outdoor applications use of your measuring tasks, despite the weather-related ambient conditions, you can achieve reliable results for temperature and humidity. The specially...

PL – probe

Humidity and temperature sensors optimised for HVAC...

KL – duct mounted

...with gauze filters as standard. Other filters are available on request. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA® sensor element, the sensor...

WL – indoor

Humidity and temperature sensors indoor of the "Light series" have been specially adapted to the needs of the ventilation and air-conditioning sector. Capacitive MELA® sensorchips...

ATEX KC.Ex – duct mounted

...sensor part with a sintered filter (both made from stainless steel), mounted on a robust aluminium pressure die-cast housing (transmitter component). These sensors measure with...

Humidity standards

The ZE 31/1-series humidity standards are used as a simple and reliable way of checking Mela® humidity sensors on-site or in the laboratory. A reproducible...

ATEX GC.Ex – wall mounted

...(transmitter component). These sensors measure with very high precision and are ideally suited for industrial applications, e.g.: Paint shops Oil-riggs The food processing industry Hazardous...

Protective filter Ø 20 mm for outdoor applications

For extreme applications (near the sea, desert, mountains, areas with high air speed etc.) we recommend our stainless steel sinter filter....

PM15P – digital probe

...of the measurement process Hx converter with capacitive Mela® humidity sensing element PMU-P Operating temp. up to 70 °C Accuracy F. (25 °C): ± 1,5...

eStat10 – electronic hygrostat

...automation, agricultural and food technology, energy and environmental technology or meteorology. The potential-free relay outputs can be configured internally as either normally closed (NC) or...

eStat20 – electronic hygrostat with remote sensor

...food technology, energy and environmental technology or meteorology. The eStat20DUO has a remote sensor which can be mounted up to 25 m away. The potential-free...

eStat10 DUO – electronic hygro-thermostat

...technology, energy and environmental technology or meteorology. The potential-free relay outputs can be configured internally as either normally closed (NC) or normally open (NO) contacts....

eStat20 DUO – electronic hygro-thermostat with remote sensor

...technology, energy and environmental technology or meteorology. The eStat20DUO has a remote sensor which can be mounted up to 25 m away. The potential-free relay...

Condensation controller – FGO / FGS

...on or off - Mela® humidity sensor element - signal the point at which the temperature drops below the dew-point This means that cooling ceilings,...

LK – duct mounted

...temperature are used to calculate enthalpy, absolute humidity, air/water mixing ratio or wet bulb temperature. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA®...

ZC and ZC.H – Transmitter with remote probe

...tube. They can measure relative humidity and temperature, in air and other non-aggressive gases, for operating temperatures up to 200 °C. These sensors are ideally...

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

...125°C or up to 160°C. These sensors are ideally suited for industrial applications, e.g. in drying processes. Capacitive MELA® sensorchips Equipped with the highly dynamic...

DI – Indoor

Sensors for humidity and temperature - the integral measuring chamber is separated from the transmitter electronics, this ensures effective ventilation of the humidity and temperature...

BK – duct mounted

...MELA® sensorchips Equipped with the highly dynamic capacitive MELA® sensor element, the sensor provides reliable performance across the full humidity range. Using the MELA® sensor...

(T)FK120J – Indoor

...highly accurate measurements across the entire measuring range. Their excellent measuring characteristics have made them some of the best-selling items for semi-industrial and industrial applications....

HSF Humidity sensor

Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces to monitor if the temperature drops below the dew-point. They measure the...

VC/11 Compact sensor (ammonia-resistant)

These compact sensors have been specially developed for extreme conditions. The sensor can be used in areas contaminated with a variety of pollutants (e.g. ammonia),...

Wall console for duct version

Wall console for sensors, made of plastic, for mounting duct version Ø 20 mm. With a mounting sleeve (Article Nr. 00.502) also suitable for sensor...

GC – wall mounted

...to measure relative humidity and temperature, in air and other non-aggressive gases. These sensors are ideally suited to industrial applications, e.g. drying processes. Capacitive MELA®...

S series SZKA probes with cable

...processing, the measurement accuracy for humidity achieves excellent values of ±1.5 % RH. In temperature measurement, the platinum resistance sensor achieves tolerances of ±0.15 K....

KC – duct mounted

...steel tube. They can measure relative humidity and temperature, in air and other non-aggressive gases, for operating temperatures up to 125 °C. These sensors are...