Searchresult

Searched for: Resistant to ammonia - Found(73)

Product

VC/11 Compact sensor (ammonia-resistant)

Humidity and temperature sensor with stainless steel tube, resistant to ammonia...

Product

AW with remote probe

...at pressures of up to 25 bar. Additionally there is the option for resistance to ammonia. The integrated hx processor can calculate further humidity values...

Product

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

...housing and a stainless steel tube. The pressure-resistant version „D“ and „HD“ can be used at pressures up to 25 bar, at temperatures up to...

Product

S series SVKA probes

...temperatures up to 85 °C in non-corrosive air. Optionally pressure-resistant up to 10 bar. SVKA.00 -40...80 °C SVKA.0E -50...150 °C The scope of delivery includes...

Product

S series SZKA probes with cable

...recommend to use the filter type ZE04 together with a PTFE filter. Transmitter der A-Serie The integrated hx processor can calculate further humidity values and...

Product

BZ – Transmitter with remote probe

...series, the probe and transmitter are firmly connected to one another. The integrated hx processor can calculate further humidity values and apply them to the...

Product

AW – combined with probes of the S series

Operating temp. up to bis 85 °C Accuracy : ±1,5 % RH On-site calibration IP65 Stainless steel sensor tube Modulair, can be combined...

Product

AK combined with probes of the S series

...calculate further humidity values and apply them to the two outputs. With the RS485 standard all of the hx-values can be read simultaneously. Due to...

Product

VR, VR.D – Compact sensor with robust head

Compact sensor with stainless steel casing, resistant to pressure up to 25 bar...

Product

LK – duct mounted

...increased requirements (e.g. condensation). It also can be made resistant to vibrations. With analogue output The transmitters with analog output have a very stable current...

Product

Condensation controller FAS

...the cooling pipe and transfers the cold to the water resistant Polyga measuring element. The set point can be set inside and has to be...

Product

Condensation controller FAS 250VAC

...the cooling pipe and transfers the cold to the water resistant Polyga measuring element. The set point can be set inside and has to be...

Product

IVK – Stainless steel probes with plug-in connection (modbus)

Operating temp. -40 ... 80 °C Accuracy H.: ± 1,5 % RH / 10...90 % RH Accuracy T.: ± 0,2 K Robust Very precise Dew-resistant...

Product

LP – probe

...are very suitable for helping to monitor energy costs in HVAC and building automation applications. Thanks to their high quality manufacturing, these transmitters can also...

Product

DZK – modular design

Operating temperature up to 125 °C Accuracy H: ±2 % RH Accuracy T: ≤±0.35 K On-site calibration Easy to install...

Product

LW – wall mounted (analogue)

...suitable to monitor energy costs in HVAC and building automation applications. Thanks to its high quality manufacturing, the LW transmitter can also be used in...

Product

LW – wall mounted (modbus)

...filter with an IP65 degree of protection. An extra sealing can protect against increased requirements (e.g. condensation). It also can be made resistant to vibrations....

Product

BK – duct mounted

...apply them to the two outputs. With the RS485 standard all of the hx-values can be read simultaneously. Due to the digitisation of signal processing,...

Product

Installation aids Ø 15 mm

...°C ZA25 Mounting plate, stainless steel, suitable for mounting sensors Ø 15 mm in ventilation ducts used for air containing ammonia, up to 100 °C...

Product

IAK – Probes with plug-in connection

I series Analogue probes with plugin of the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They...

Product

IRK – Probes with robust head

Analogue probes with robust head - I series Transmitters of the I series are robust, compact probe sensors to measure relative humidity and temperature with...

Product

ITK – Stainless steel probes (modbus)

Operating temp. -40 ... 80 °C Accuracy H.: ± 1,5 % RH / 10...90 % RH Accuracy T.: ± 0,2 K Robust Very precise Dew-resistant...

Product

DW – wall mounted

Excellent transmitter - highly accurate and easy to install. The industrial versions DW can be used at operating temperatures between -30 to 80 °C. Equipped...

Product

DK – duct mounted

...via USB port. Easy to install The housing provides protection in accordance with IP 65. Only a single screw is required to close it securely....

Product

PC and PC.S probe

...sensor element, the sensor provides reliable performance across the full humidity range. Using the MELA® sensor element ensures long-term stability, resistance to dew formation, minimal...

Product

PC-ME and PC.S-ME outdoor version

...reliable performance across the full humidity range. Using the MELA® sensor element ensures long-term stability, resistance to dew formation, minimal hysteresis, and strong dynamic capabilities....

Product

RC – Probe with robust head and RC-ME meteorology

...reliable performance across the full humidity range. Using the MELA® sensor element ensures long-term stability, resistance to dew formation, minimal hysteresis, and strong dynamic capabilities....

Product

Protective filter Ø 20 mm

Filters and protective baskets are used to adapt sensors to the different locations....

Product

eStat20 – electronic hygrostat with remote sensor

...be easily set without having to open the housing. It can be set with dip switch or rotating knob. Easy to install All the sensitive...

Product

eStat20 DUO – electronic hygro-thermostat with remote sensor

...easily set without having to open the housing. It can be set with dip switch or rotating knob. Easy to install All the sensitive electronics...

Product

Indoor humidistat Hygroswitch

ON/OFF controller, water-resistant POLYGA® measuring element...

Product

Protective filter Ø 12 mm

To protect and adapt the sensors to the different locations of use...

Product

ZC and ZC.H – Transmitter with remote probe

...suited to industrial applications, e.g. drying processes. ZC operating temp. up to 125 °C ZC.H operating temp. up to 200 °C Capacitive MELA® sensorchips Equipped...

Product

Indoor humidistat HGMini

ON/OFF controller, water-resistant POLYGA® measuring element...

Product

Protective filter Ø 15 mm

Filters and protective baskets are used to adapt sensors to the different locations...

Product

PM15P – digital probe

...of the measurement process Hx converter with capacitive Mela® humidity sensing element PMU-P Operating temp. up to 70 °C Accuracy F. (25 °C): ± 1,5...

Product

DI – Indoor

Humidity and temperature transmitter - highly accurate and easy to install...

Product

eStat10 – electronic hygrostat

...can be connected and closed at any point later on and that without tools. This makes it easier to safely assemble on a construction site....

Product

eStat10 DUO – electronic hygro-thermostat

...that contains the sensitive electronics, can be connected and closed at any point later on. No tools needed, this makes it very easy to safely...

Product

Digital combi-controller EDJ3

...user-friendly controller is very easy to use. It is pre-programmed so no particular knowledge of control engineering is required to be able to solve simple...

Product

Probe with cable

...can optionally upgrade the degree of protection to IP65. They can operate in temperatures from -40 °C … 85 °C. High temperature version (up to...

Product

KC – duct mounted

Operating temp. up to 125 °C Accuracy H. ±2% RH (5…95 % at 10…40 °C) Accuracy T. ± 0,2 K with voltage output Accuracy T...

Product

(T)FG120 – Indoor Humidity Temperature Sensor

...With the robust Polyga® humidity measuring element Excellent measuring properties High accuracy in the high humidity range Long term stability Robust, resistant to high humidity...

Product

Condensation controller – FGO / FGS

Humidity sensor to prevent the building of condensed water...

Product

Pluggable probe

Operating temp. up to 85 °C Accuracy H: ±2 % RH Accuracy T: ≤± 0,35 K On-site calibration...

Product

MCK – miniature sensor

Operating temp. up to 85 °C Accuracy RH : ±2.5 % RH / 10…90 % RH Accuracy T. ±0.5 K Ouput: 0-1 V or digital...

Product

HG80 Duct humidistat

On-off controller The humidistat type HG80 is used as an on-off controller to control the relative air humidity. It is used to control air humidifying...

Product

Indoor humidistat HG120

Operating temp. up to 60 °C Accuracy: ±3 % RH High accuracy in the high humidity range Robust Long-term stability Washable Polyga® measuring element No...

Product

GC – wall mounted

...to measure relative humidity and temperature, in air and other non-aggressive gases. These sensors are ideally suited to industrial applications, e.g. drying processes. Capacitive MELA®...

Product

Protective filter Ø 20 mm for outdoor applications

...non-aggressive atmosphere. Operating temperature range: -40...80°C, IP30. ZE20 - PBT plastic filter, metallized, with inserted filter gauze (nominal pore size 0.45 μm), v up to...

Product

LI – indoor

...to monitor energy costs in HVAC and building automation applications. Thanks to their high quality manufacturing, these transmitters can also be used in moderate industrial...

Product

GC-ME wall mounted – meteorology version

Operating temp. up to 80 °C Accuracy H. ±2% r.h.(5…95 %rh at 10…40 °C) Accuracy T. ± 0,2 K with voltage output Accuracy T. ±...

Product

PL – probe

Operating temperature up to 80 °C Accuracy RH (23 °C): ±3 % RH / 30…80 % RH Accuracy T. (10…40 °C): ±1 K Current outputs...

Product

KL – duct mounted

Operating temperature up to 80 °C Accuracy RH: ±3 % RH / 30…80 % RH Accuracy T.: ±1 K Current outputs galvanically isolated...

Product

WL – indoor

Operating temperature up to 60 °C Accuracy H.: ±3 % RH Accuracy T.: ±1 K Current outputs galvanically isolated...

Product

BW – wall mounted

Operating temp up to 200 °C Accuracy H.: ±1.5 % RH Accuracy T.: ± 0.15 K with analogue output Accuracy T.: ± 0.2 K with...

Product

HSF Humidity sensor

Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces to monitor if the temperature drops below the dew-point. They measure the...

Product

ATEX KC.Ex – duct mounted

Operating temp. up to 80 °C Accuracy H. ±2% RH (5…95 % at 10…40 °C) IP66 ATEX approval Categories 1/2 G and 2D Stainless steel...

Product

Installation aids Ø 20 mm

...to 80 °C ZA24/28 Mounting plate, suitable for mounting sensors Ø 20 mm in ventilation ducts up to 200 °C (stainless steel and brass, nickel-plated)...

Product

Pressure-tight fitting

ZA28 Pressure-tight feed-through fitting, pressure-tight up to 10 bar, for temperatures up to 150 °C. Thread G 3/4" with locking ring, Material: Stainless steel 1.4571...

Product

VC – Compact rod sensor

Operating temperature up to 80°C Humidity accuracy: ±2% RH (5...95 %RH at 10...40 °C) Temperature accuracy: ± 0.2 K with voltage output Temperature accuracy: -0.2...+0.6...

Product

ATEX GC.Ex – wall mounted

Operating temp. up to 80 °C Accuracy H. ±2% RH (5…95 % at 10…40 °C) IP66 ATEX approval Categories 1/2 G and 2D Stainless steel...

News

From the Ötzi Museum to cheese maturing

The mpk 4.0 technology forum interviewed our Mr. Kiel. Listen to a pleasant conversation about humidity and temperature measurement and it's versatility. The PodCast is spoken in German.

News

Welcome to the start of training 2024 at Galltec+Mela

We are thrilled to welcome two new members to our team in October. In order to start an apprenticeship in Germany and build a new life, both have taken the courageous step of leaving their home country of Turkey.

Product

HM80 Hygro OEM Module

...on the humidity. The changes in length of the POLYGA® fibres are transferred via a lever system to a microswitch, resulting in an on/off controller...

Product

HM120 Hygro Modul

...via a lever system to a microswitch, resulting in an on/off controller that needs no auxiliary power supply. Waterresistent and maintenance-free It has unparalleled long-term...

Product

DUO1060

The hygro-thermostat type DUO 1060 is used as an on-off controller to control the relative air humidity and the temperature. Typical areas of use are...

Product

(T)FG80 – Humidity Temperature Sensor

Typs: FG80 - Humidity Sensor TFG80 - Humidity Temperature Sensor (T)FG80H with passive resistance output up to 10 kOhm (T)FG80J with active current or voltage...

Product

(T)FK80J – duct version

Operating temperature up to 80 °C Accuracy H.: ± 2 % RH / 40...60 % RH Accuracy T.: ± 0,2 K (voltage output) Accuracy T.:...

Product

(T)FK120J – Indoor

Operating temperature up to 60 °C Accuracy H. (23 °C): ± 3,5 % RH / 5...95 % RH Accuracy T.: ± 0,8 K Robust With...

Product

Filter for Polyga duct mounted version

Operating temperature up to 80 °C Diameter: Ø 16 mm...

Downloads

Downloads

This page has programs and files available to download. Please note the specified system requirements.

About us

Job offers

...supportive environment. Bring your skills, ideas, and dedication — and let’s talk about how we can grow together. We look forward to hearing from you!...