Searchresult

ZC and ZC.H – Transmitter with remote probe

Heavy-duty transmitters for advanced requirements. The ZC and ZC.H (high temperature) transmitters are supplied with a robust, pressure die-cast aluminium housing and a stainless steel...

BZ – Transmitter with remote probe

Heavy-duty transmitters for humidity and temperature for advanced requirements...

DZK – modular design

Humidity and temperature transmitter with many designs...

LW – wall mounted

Humidity and temperature transmitter optimised for HVAC – LW, economical transmitters – L-series is primarily optimized for ambient room conditions. It is very suitable to...

LI – indoor

Humidity and temperature transmitter for HVAC, LI-roomversion of the economical transmitter series is primarily optimised for ambient room conditions and are very suitable for helping...

DW – wall mounted

Operating temperatures up to 80 °C Accuracy Humidity: ± 2 % Accuracy Temperature: ±0,2 K (with voltage output) Accuracy Temperature: ±0,3 K (with current output)...

S series SVKA probes

Industry Transmitters for humidity and temperature, the A-series probe and transmitter are interchangeable and can be combined in any combination; they can be used at...

LK – duct mounted

Humidity and temperature transmitter optimised for HVAC - LK, economical transmitters - L-series is primarily optimized for ambient room conditions. It is very suitable to...

AK combined with probes of the S series

Transmitters for humidity and temperature can be combined with different probes...

AW with remote probe

...measure relative humidity and temperature in operating temperatures up to 200 °C. Combined with the probe SZKA.HD in operating temperatures up to 160 °C and...

DK – duct mounted

Humidity and temperature transmitter - highly accurate and easy to install...

DI – Indoor

Sensors for humidity and temperature - the integral measuring chamber is separated from the transmitter electronics, this ensures effective ventilation of the humidity and temperature...

ATEX KC.Ex – duct mounted

Humidity and temperature sensor with ATEX certificate...

ATEX GC.Ex – wall mounted

ATEX-certified high-precision transmitter, tailor-made explosion-proof technology with ATEX certification for use in potentially explosive atmospheres and areas with combustible dust; equipment in categories 1/2G and...

AW – combined with probes of the S series

Industry Transmitters for humidity and temperature, AW (wall mounted), can be combined with any probe of the S series. The AW-transmitter combined with the probe...

Probe with cable

...125°C) The high temperature version is equipped with an IP65 PTFE filter and a high temperature cable. They can operate in temperatures from -40 °C...

Protective filter Ø 15 mm

...speed and clean atmosphere. - Operating temperature range: -80...200°C - IP10 - Response time humidity: 20s. ZE13 - Coarse-pored sintered filter made of high-grade steel...

Protective filter Ø 20 mm

...suitable for low air speed and clean, non-aggressive atmosphere. E.g. in a laboratory and indoor applications. Operating temperature range: -40...85°C, IP20. ZE17 -Same as type...

(T)FK80J – duct version

FK80J Humidity Sensors TFK80J Humidity-Temperature Sensors The sensors of the FK Series are very robust humidity and temperature sensors, providing highly accurate measurements across the...

(T)FK120J – Indoor

FK120J Humidity Sensor TFK120J Humidity-Temperature Sensor Transmitters for semi-industrial and industrial applications. These humidity and temperature sensors are very robust, providing highly accurate measurements across...

S series SZKA probes with cable

Humidity and temperature probes to be combined with transmitterhead AW or AK...

(T)FG80 – Humidity Temperature Sensor

POLYGA® transmitters demonstrate excellent measuring properties and accuracy in high humidity conditions....

(T)FG120 – Indoor Humidity Temperature Sensor

POLYGA® transmitters demonstrate excellent measuring properties and accuracy in high humidity conditions....

PM15P – digital probe

...calculate enthalpy, absolute humidity, mixture ratio (water/air) or wet-bulb temperature. No interruption of the measurement process When it‘s time to re-calibrate the transmitter, the measuring...

Protective filter Ø 20 mm for outdoor applications

...non-aggressive atmosphere. Operating temperature range: -40...80°C, IP30. ZE20 - PBT plastic filter, metallized, with inserted filter gauze (nominal pore size 0.45 μm), v up to...

Pluggable probe

...an IP65 degree of protection. They operate in temperatures from -40 °C ... 85 °C. Maintenance without interrupting the measuring process The plug-in probes offer...

GC-ME wall mounted – meteorology version

...steel sinter filter. It measures relative humidity and temperature, in air and other non-aggressive gases in temperatures up to 80 °C. Capacitive MELA® sensorchips Equipped...

BK – duct mounted

Heavy-duty transmitters for advanced requirements...

LP – probe

Humidity and temperature transmitter optimised for HVAC...

BW – wall mounted

Our Heavy-duty transmitter wall mounted BW can be used at temperatures between -40 °C and 85 °C. The integrated hx processor can calculate further humidity...

Condensation controller – FGO / FGS

Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces and are used to monitor if the temperature drops below the dew-point....

PL – probe

Humidity and temperature sensors optimised for HVAC...

WL – indoor

Humidity and temperature sensors optimised for HVAC...

MCK – miniature sensor

Miniature humidity and temperature sensors are specially adapted to measurement tasks for which there is only limited space available. They deliver accurate values of the relative humidity and tempe...

IAK – Probes with plug-in connection

Humidity and temperature probe with analogue or digital output...

IRK – Probes with robust head

Analogue probes with robust head - I series Transmitters of the I series are robust, compact probe sensors to measure relative humidity and temperature with...

VC – Compact rod sensor

Operating temperature up to 80°C Humidity accuracy: ±2% RH (5...95 %RH at 10...40 °C) Temperature accuracy: ± 0.2 K with voltage output Temperature accuracy: -0.2...+0.6...

eStat20 – Sensor und Hygrostat in einem!

...und einen Drehknopf ohne Öffnen des Gehäuses eingestellt werden. Als Transmitter bietet der eSta20 kontinuierliche Spannungsausgangssignale für relative Feuchte und Temperatur. Keine Unterbrechung des Messvorganges...

Condensation controller FAS

...caused by excessive moisture or air humidity. They are mounted on cooling water pipes or on cooled surfaces and monitor if the temperature drops below...

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

Heavy-duty transmitters to measure humidity and temperature with advanced requirements. The ZC.D and ZC.DH (high temperature) transmitters are supplied with a robust, pressure die-cast aluminium...

KL – duct mounted

Humidity and temperature sensors optimised for HVAC...

IVK – Stainless steel probes with plug-in connection (modbus)

Transmitters in the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a...

DUO1060

Scale range humidity: 30...100 % RH Scale range temperature: 10...60 °C...

ITK – Stainless steel probes (modbus)

Humidity and temperature probe with RS485 / MODBUS-RTU or RS232...

Condensation controller FAS 250VAC

...caused by excessive moisture or air humidity. They are mounted on cooling water pipes or on cooled surfaces and monitor if the temperature drops below...

eStat10 – electronic hygrostat

...Accuracy H.: ±3 % RH Accuracy T.: ±0.3 K 2 configurable switching outputs 2 permanent signal outputs Long-term stability Easy to install Temperature compensation Keylock...

eStat20 – electronic hygrostat with remote sensor

Combined device – sensor and hygrostat in one Hygrostat with two individually configurable relays (humidity) and two additional analogue outputs (for humidity and temperature) are...

(T)FM80 OEM – duct version

Humidity temperature sensor - duct version typs: FM80 – Humidity module TFM80 – Humidity-Temperature-Module TFM80 Module for integration in a wide range of customer-specific standard...

eStat10 DUO – electronic hygro-thermostat

...Accuracy H.: ±3 % RH Accuracy T.: ±0.3 K 2 configurable switching outputs 2 permanent signal outputs Long-term stability Easy to install Temperature compensation Keylock...

eStat20 DUO – electronic hygro-thermostat with remote sensor

Combined device – sensor and hygrostat in one Hygro-Thermostat with two individually configurable relays and two additional analogue outputs (for humidity and temperature) are suitable...

HSF Humidity sensor

Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces to monitor if the temperature drops below the dew-point. They measure the...

KC – duct mounted

Heavy-duty transmitters to measure humidity and temperature with advanced requirements. The KC transmitters are supplied with a robust, pressure die-cast aluminium housing and a stainless...

Protective filter Ø 12 mm

Protective filter Ø 12mm protect the sensor from mechanical damage and adapt it to the different locations of use. Filters and protective cages are designed to adapt the sensors to the different lo...

PC and PC.S probe

Robust analogue probe for humidity and temperature...

PC-ME and PC.S-ME outdoor version

Robust probes – outdoor meteorology applications: PC-ME with cable connection PC.S-ME with plug-in connection and coupling The robust construction and the option of equipping the sensors with ...

Installation aids Ø 20 mm

Installation aids Ø 15 mm

RC – Probe with robust head and RC-ME meteorology

Very robust analogue probes optimized for meteorology: RC with robust head RC-ME meteorology version The robust construction and the option of equipping the sensors with protective filters and a var...

VR, VR.D – Compact sensor with robust head

...All sensors in this series are equipped as standard with equipped with a ZE 13 stainless steel sintered filter as standard. The humidity and temperature...

VC/11 Compact sensor (ammonia-resistant)

Humidity and temperature sensor with stainless steel tube, resistant to ammonia...

Filter for Polyga duct mounted version

Operating temperature up to 80 °C Diameter: Ø 16 mm...

GC – wall mounted

Heavy-duty transmitters analogue output for advanced requirements. The transmitters in this series are supplied with a robust, pressure die-cast aluminium housing with aluminium sensor part,...

Precision humidity and temperature control for your greenhouses

HM80 Hygro OEM Module

The hygro module HM80 is a humidity-dependent switch that can be fitted in equipment such as hygrostats, humidifiers, dehumidifiers, ventilating fans, driers and many more. The module represents an ...

HM120 Hygro Modul

The hygro module HM120 is a humidity-dependent switch that can be fitted in equipment such as hygrostats, humidifiers, dehumidifiers, ventilating fans, driers and many more. The module represents an...

Weather guard

Weather guard outdoor applications use of your measuring tasks, despite the weather-related ambient conditions, you can achieve reliable results for temperature and humidity. The specially...

Indoor humidistat Hygroswitch

On-off controller The room humidistat Hygroswitch is an on-off controller. It is used to control air humidifying and dehumidifying in offices and computer rooms.  Other areas of use are storage of ...

Pressure-tight fitting

ZA28 Pressure-tight feed-through fitting, pressure-tight up to 10 bar, for temperatures up to 150 °C. Thread G 3/4" with locking ring, Material: Stainless steel 1.4571...

Humidity standards

...system. The relative humidity which forms in the volume of air (testing chamber) is dependent on the saline solution and the temperature of the solution....

Digital combi-controller EDJ3

Digital combi-controller for humidity and temperature...

HG80 Duct humidistat

On-off controller The humidistat type HG80 is used as an on-off controller to control the relative air humidity. It is used to control air humidifying and dehumidifying in offices and computer rooms...

Indoor humidistat HG120

Selfpowered humidistats robust and reliable with On-off controller The humidistat type HG120 is used as an on-off controller to control the relative air humidity. It is used to control air humidifyi...

Indoor humidistat HGMini

Indoor Humidistat ON/OFF controller The HG Mini serves as an on-off controller for regulating relative air humidity. It’s suitable for controlling air humidifiers and dehumidifiers in various ...