Searchresult

PC-ME and PC.S-ME outdoor version

...sensors with protective filters and a variety of special equipment, make these sensors stand out as versatile all-rounders. Extreme outdoor conditions For extreme outdoor conditions...

GC-ME wall mounted – meteorology version

...robust construction, especially developed for outdoor use. For extreme applications (near the sea, desert, mountains, areas with high air speed etc.) we recommend our stainless...

Protective filter Ø 20 mm for outdoor applications

Filters and protective baskets outdoor applications: ZE16+ - PTFE filter and protective basket ZE16, open, conductive metallized finish, Suitable for low air speed and clean,...

RC – Probe with robust head and RC-ME meteorology

...protective filters and a variety of special equipment, make these sensors stand out as versatile all-rounders. Extreme outdoor conditions For extreme outdoor conditions (near the...

Protective filter Ø 20 mm

...use in extreme conditions, average pore size 20 μm. Meets the EMC directive for the I Series; but not for the other sensors. For e.g....

Protective filter Ø 15 mm

...fine-pored PTFE, average pore size approx. 20 μm. For use in particularly demanding conditions. Meets the EMC directive for the A/B series, but not for...

Weather guard

Weather guard outdoor applications use of your measuring tasks, despite the weather-related ambient conditions, you can achieve reliable results for temperature and humidity. The specially...

IVK – Stainless steel probes with plug-in connection (modbus)

Transmitters in the I series are robust, compact probe sensors to measure relative humidity and temperature with high precision. They can be used for a...

ITK – Stainless steel probes (modbus)

...precision. They can be used for a wide range of applications. Equipped with stainless steel sintered filters, they can be used in extreme locations near...

IAK – Probes with plug-in connection

...can be used for a wide range of applications. Equipped with stainless steel sintered filters, they can be used in extreme locations near the sea,...

IRK – Probes with robust head

...high precision. They can be used for a wide range of applications. Equipped with stainless steel sintered filters, they can be used in extreme locations...

PC and PC.S probe

...variety of special equipment, make these sensors stand out as versatile all-rounders. Extreme outdoor conditions For extreme outdoor conditions (near the sea, in deserts, mountains,...

Protective filter Ø 12 mm

...10 m/s. For e.g. meteorology, industry. ZE05 - Sintered filter made of fine-pored PTFE for extreme operating conditions, average pore size 20 μm. For e.g....

MCK – miniature sensor

Miniature humidity and temperature sensors are specially adapted to measurement tasks for which there is only limited space available. They deliver accurate values of the relative humidity and tempe...

(T)FK80J – duct version

FK80J Humidity Sensors TFK80J Humidity-Temperature Sensors The sensors of the FK Series are very robust humidity and temperature sensors, providing highly accurate measurements across the...

ATEX KC.Ex – duct mounted

ATEX-certified high-precision Transmitter for use in potentially explosive atmospheres and areas with combustible dust; equipment in categories 1/2G and 2D. The sensors consist of a...

ATEX GC.Ex – wall mounted

ATEX-certified high-precision transmitter, tailor-made explosion-proof technology with ATEX certification for use in potentially explosive atmospheres and areas with combustible dust; equipment in categories 1/2G and...

VR, VR.D – Compact sensor with robust head

...pressure-resistant up to 25 bar They have been specially developed for harsh operating conditions. Sensors are used to measure the relative humidity or the relative...

PM15P – digital probe

...heads (PMU) can be switched within seconds, allowing processes to run continuously with virtually no interruption. Capacitive humidity sensor Use of capacitive humidity sensor elements...

LK – duct mounted

...temperature are used to calculate enthalpy, absolute humidity, air/water mixing ratio or wet bulb temperature. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA®...

Indoor humidistat Hygroswitch

...areas of use are storage of foodstuffs and luxury foods, cooling rooms for fruit and vegetables, greenhouses for gardening use, the textile industry, the paper...

Digital combi-controller EDJ3

Digital combi-controller EDJ3 can be used as a two or three point controller. The output states are shown by LEDs. Very easy to use The...

HG80 Duct humidistat

On-off controller The humidistat type HG80 is used as an on-off controller to control the relative air humidity. It is used to control air humidifying...

Indoor humidistat HG120

...rooms for fruit and vegetables, greenhouses for gardening use, the textile industry, the paper and printing industry, the film industry and hospitals. Remarkably straightforward and...

PL – probe

...on request. Use of capacitive humidity sensor elements is a guarantee of high long-term stability, resistance to dew formation, small hysteresis and good dynamic performance....

LP – probe

The LP is the L-series probe sensor. These economical transmitters, with a highly dynamic capacitive humidity sensor chip, are primarily optimised for ambient roomconditions and...

Installation aids Ø 15 mm

...°C ZA25 Mounting plate, stainless steel, suitable for mounting sensors Ø 15 mm in ventilation ducts used for air containing ammonia, up to 100 °C...

KL – duct mounted

Humidity and temperature sensors optimised for HVAC...

WL – indoor

Humidity and temperature sensors optimised for HVAC...

Wall console for duct version

Wall console for sensors, made of plastic, for mounting duct version Ø 20 mm. With a mounting sleeve (Article Nr. 00.502) also suitable for sensor...

Installation aids Ø 20 mm

ZA20 Mounting plate, suitable for mounting sensors Ø 20 mm in ventilation ducts up to 80 °C ZA24/28 Mounting plate, suitable for mounting sensors Ø...

ZC and ZC.H – Transmitter with remote probe

...tube. They can measure relative humidity and temperature, in air and other non-aggressive gases, for operating temperatures up to 200 °C. These sensors are ideally...

BK – duct mounted

Depending on the individual design, these sensors can be used at temperatures between -80 °C and +200 °C and at pressures of up to 10...

AW – combined with probes of the S series

...series. Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA® sensor element, the sensor provides reliable performance across the full humidity range. Using the...

ZC.D, ZC.HD – with remote probe, pressure-resistant up to 25 bar

...125°C or up to 160°C. These sensors are ideally suited for industrial applications, e.g. in drying processes. Capacitive MELA® sensorchips Equipped with the highly dynamic...

GC – wall mounted

...to measure relative humidity and temperature, in air and other non-aggressive gases. These sensors are ideally suited to industrial applications, e.g. drying processes. Capacitive MELA®...

KC – duct mounted

...steel tube. They can measure relative humidity and temperature, in air and other non-aggressive gases, for operating temperatures up to 125 °C. These sensors are...

VC – Compact rod sensor

Compact stainless steel rod sensor for use under extreme conditions...

Filter for Polyga duct mounted version

Filter for Polyga duct mounted version, PTFE, two-part, for sensor types HG80 and FG80 recommended for extreme operating conditions. Recommended for air speeds between 8...

DW – wall mounted

...with the highly dynamic capacitive MELA® sensor element for the entire range of relative humidity measurement. HX converter for calculating derived humidity variables The integrated...

BZ – Transmitter with remote probe

Heavy-duty transmitters for humidity and temperature for advanced requirements...

AK combined with probes of the S series

Transmitters for humidity and temperature can be combined with different probes...

AW with remote probe

...Capacitive MELA® sensorchips Equipped with the highly dynamic capacitive MELA® sensor element, the sensor provides reliable performance across the full humidity range. Using the MELA®...

DK – duct mounted

...used at operating temperatures between -30 to 80 °C. Equipped with the highly dynamic capacitive MELA® sensor element for the entire range of relative humidity...

VC/11 Compact sensor (ammonia-resistant)

These compact sensors have been specially developed for extreme conditions. The sensor can be used in areas contaminated with a variety of pollutants (e.g. ammonia),...

(T)FK120J – Indoor

FK120J Humidity Sensor TFK120J Humidity-Temperature Sensor Transmitters for semi-industrial and industrial applications. These humidity and temperature sensors are very robust, providing highly accurate measurements across...

S series SZKA probes with cable

...design, these sensors can be used at temperatures between -80 °C and +200 °C and at pressures of up to 25 bar. SZKA.0H -80…200 °C...

LI – indoor

Humidity and temperature transmitter for HVAC, LI-roomversion of the economical transmitter series is primarily optimised for ambient room conditions and are very suitable for helping...

LW – wall mounted (analogue)

Humidity and temperature transmitter optimised for HVAC, the wall-mounted version LW of the economical transmitters L-series is primarily optimised for ambient room conditions. It is...

LW – wall mounted (modbus)

...dynamic capacitive MELA® sensor element for the entire range of relative humidity measurement. Optionally, it can be equipped with a PTFE filter with an IP65...

BW – wall mounted

Heavy-duty transmitters for advanced requirements...

Condensation controller – FGO / FGS

with capacitive Mela® humidity sensor element for condensation control with analogue output signal type FGO2.K/5 with switching output type FGS...

HSF Humidity sensor

for monitoring the formation of condensation with IP65...

S series SVKA probes

Industry Transmitters for humidity and temperature, the A-series probe and transmitter are interchangeable and can be combined in any combination; they can be used at...

Indoor humidistat HGMini

Indoor Humidistat ON/OFF controller The HG Mini serves as an on-off controller for regulating relative air humidity. It's suitable for controlling air humidifiers and dehumidifiers...

Humidity standards

For a simple and reliable way of checking humidity sensors on-site...

HM80 Hygro OEM Module

...that needs no auxiliary power supply. Waterresistent and maintenance-free It has unparalleled long-term stability and is 100 % waterproof, which makes it ideal for use...

HM120 Hygro Modul

...long-term stability and is 100 % waterproof, which makes it ideal for use in high humidity. In pure ambient air the measurement element is maintenance-free....

DZK – modular design

...humidity variables The integrated hx processor uses the values for relative humidity and temperature to calculate the dew point, enthalpy, mixing ratio, absolute humidity or...

DI – Indoor

Sensors for humidity and temperature - the integral measuring chamber is separated from the transmitter electronics, this ensures effective ventilation of the humidity and temperature...

DUO1060

The hygro-thermostat type DUO 1060 is used as an on-off controller to control the relative air humidity and the temperature. Typical areas of use are...

Capacitive MELA® sensor chip

eStat10 – electronic hygrostat

Indoor electronic humidistat - combined device - sensor and hygrostat in one Hygrostat with two individually configurable relays and two additional analogue outputs (for humidity...

eStat20 – electronic hygrostat with remote sensor

Combined device – sensor and hygrostat in one Hygrostat with two individually configurable relays (humidity) and two additional analogue outputs (for humidity and temperature) are...

eStat10 DUO – electronic hygro-thermostat

Combined device – sensor and hygrostat in one Hygro-Thermostat with two individually configurable relays and two additional analogue outputs (for humidity and temperature) are suitable...

eStat20 DUO – electronic hygro-thermostat with remote sensor

Combined device – sensor and hygrostat in one Hygro-Thermostat with two individually configurable relays and two additional analogue outputs (for humidity and temperature) are suitable...

Request for catalogue

Precision humidity and temperature control for your greenhouses

eStat10 with keylock – ideal for climate control in public buildings

The eStat is a combination of a sensor and a humidistat. With its two analogue outputs for a continuous signal for humidity and temperature and two switching points, it can maintain an optimal indoor climate automatically. With the new keylock-feature it can be used in public buildings without the risk of unauthorized change to the settings.

Condensation controller FAS

Humidity switch for monitoring the formation of condensation - prevents damage caused by condensation or excessive humidity...

Pressure-tight fitting

ZA28 Pressure-tight feed-through fitting, pressure-tight up to 10 bar, for temperatures up to 150 °C. Thread G 3/4" with locking ring, Material: Stainless steel 1.4571...

(T)FM80 OEM – duct version

Humidity temperature sensor - duct version typs: FM80 – Humidity module TFM80 – Humidity-Temperature-Module TFM80 Module for integration in a wide range of customer-specific standard...